THE EFFECT OF SARULLA NATURAL NANOZEOLITE ADDITION IN THE PREPARATION OF NANOCOMPOSITE FOAM POLYURETHANTSVIEWED FROM FTIR CHARACTERIZATION
Abstract
The fabrication and characterization of polyurethane foam nanocomposites with the addition of Sarulla natural nanozeolite fillers has been investigated. The steps carried out in research on the manufacture of polyurethane foam nanocomposites are: 1) Preparation and purification of natural zeolites, 2) Preparation of nanozeolites, and 3) Preparation of polyurethane foam nanocomposites is carried out using an in situ process by mixing natural nanozeolites in a mixture of polypropylene glycol and toluene diisocyanate. The results of the particle size analyzer show Sarulla nanozeolite particle size is 95.8 nm. The XRF results showed that the main composition of Sarulla nanozeolites was SiO2 (80.98%) and Al2O3 (14.21%), while the XRD results showed that Sarulla nanozeolites were Mordenite types. Variation in weight ratio of nanozeolites as fillers to polypropylene glycol and toluene diisocyanate is (0, 5, 10, 15, 20 and 25)%. The results of the FTIR spectrum of polyurethane foam and polyurethane foam nanocomposite show almost the same functional groups, this is caused by the interaction that occurs between polyurethane foam and nanozeolite is a physical reaction.
An author who publishes in the Jurnal Darma Agung agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).